Check Sensors On The Input Module; Check Actuators On The Output Module - Aventics CMS B-Design Betriebsanleitung

AVENTICS | PROFIBUS DP | R499050016–BDL–001–AE

7.3.2 Check sensors on the input module

There is one LED per input on the input module for monitoring
purposes. The LED lights up if the signal level is "high".
O
Before commissioning the system, check the sensor
function and method of operation by reading the LEDs.
Fig. 19: LED displays on the M8 input module (left) and M12 (right)
Tab. 20: LED display on the input modules
LED Color
Input Yellow

7.3.3 Check actuators on the output module

O
Before commissioning, check the actuator function and the
method of operation using the LED displays on the output
module.
Commissioning and Operation
Meaning
High signal level mode
125