Otto Bock C2000 Gebrauchsanweisung Seite 194

Maintenance, Cleaning and Disinfection
Front lights
To change the halogen lamp in the front light, proceed as
follows:
1. Fold the pane forward with slight pressure on the black
locking lever at the lower end of the lamp.
2. Remove the pane with the attached halogen lamp.
3. Replace the defective halogen lamp with a new one.
4. Reinsert the pane.
Fig. 42 Replacing the front halogen lamp
194 Ottobock
|
To change the halogen lamp in the front direction indicator,
proceed as follows:
1. Open the front direction indicator by inserting a narrow
flathead screwdriver into the recess on the direction indi-
cator housing (Fig. 43, item A) and tipping the pane down.
2. Remove the pane (Fig. 43, item B).
3. Slightly rotate the halogen lamp to release it from the
lock on the lamp socket and pull it out (Fig. 43, item C).
4. For mounting, slide the halogen lamp in and rotate it into
the lock.
5. Insert the lamp socket into the housing and lock the pane
in place.
A
Fig. 43 Replacing the front direction indicator lamp
B C
C2000