Lanaform LA110304 Bedienungsanleitung Seite 4

EN
FR NL DE ES IT PL CS SK HU SL HR RU SV AR FA
HOW TO USE
DETAILS :
• Massage by vibrations
• 5 motors
• 4 vibration modes plus 1 automatic mode
• 4 massage intensities
• 4 massage areas
(upper back, lower back, hips and thighs)
• 1 "heating" function
• Timer (15, 30 or 60min.)
DESCRIPTION OF THE BACK MASSAGER :
The strap system :
Back Massager has a system of straps enabling you
to fix it to any chair. Simply pass the straps around
the chair back, bring them together and fix them to
each other using the two adhesive ends.
Control device, 2 :
1 ON/OFF
2 4 different massages
3 1 automatic mode
4 4 vibration intensities
5 3 massage durations
6 Upper back massage
7 Lower back massage
8 Hips massage
9 Thighs massage
10 "Heating" function
USING OF THE BACK MASSAGER :
ON/OFF
Back Massager operates via an adapter. First connect
the end of the power supply cable to the female
input connector located on the right-hand side of
the seat. Then plug the adaptor into a power socket.
Once connected to the electrical socket, the Back
Massager is ready to use.
You can also plug your cushion into your car using the
12 Volt adaptor (provided) and the cigarette lighter.
Please remember that the massage cushion must
not be used when driving.
Starting or stopping the appliance is controlled by
simply pressing the ON/OFF button (diagram, point 1).
4 / 48 Back Massager EN Instructions Manual
Manual mode
Thanks to this mode, you have the option to select :
· One type of massage from the four offered :
Mode 1, 2, 3, 4 (diagram, point 2).
· One of the four vibration intensities
(diagram, point 4).
· The duration of your massage (15, 30 or 60 min-
utes) (diagram, point 5).
· The massage area according to your wishes or
needs (diagram, points 6, 7, 8 and 9).
· The "heating" function which works to relax your
muscles (diagram, point 10).
You may not feel the heat through
clothing such as a jumper or jacket.
Automatic mode (diagram, point 3)
This mode consists of a sequence of different mas-
sages. This function is valuable since it offers a varied
massage. The "TIMER", "INT." and "HEAT" functions
and the desired massage area can also be used in
automatic mode.
MAINTENANCE
STORAGE
• Put the Back Massager in its box in a dry place.
• Avoid it coming into contact with sharp edges and
other pointed objects which might cut or pierce
the fabric surface.
• In order to avoid any breakage of the power lead,
do not wind it around the cushion.
• Do not hang the cushion up by the manual control
lead or the power lead.
CLEANING
• Disconnect the cushion from the power socket
and wait for a few minutes before cleaning it.
• Clean it with a soft, slightly damp sponge.
• Never let water or any other liquid come into
contact with the cushion.
• Do not immerse it in liquid to clean it.
• Never use abrasive detergents, brushes or a thin-
ning agent to clean it.