Mounting Of The Surface Housing - Eneo VKCD-1326/IR Montage- Und Betriebsanleitung

3. Mounting of the Surface Housing

1 Stick the guide pattern on the
wall or ceiling
2 Drill four holes according to the
guide pattern then insert anchors
into the drilled holes
3 Draw out power / video wires to
the connecting places. If neces-
sary, seal the cable outlet at the
housing with silicone.
4 Fixed the camera to a celling
using four screws.
In order to guarantee tightness,
all screw connections must be
treated and/or sealed.
5 Adjust desired focus and scene
by turning and moving the 3-axis
camera bracket by hand.
6 Put the dome cover over the
base.
7 Fix the dome cover on the base
by torx wrench key.
Ceiling
7
Sealing plate /
Drilling template
Dome base
Mounting screw
Dome cover
Torx wrench key