Connections; Connecting The Speakers; Connecting The Ac Power Cord - Sony FWD-40LX2F Bedienungsanleitung

Connections

Before you start
• First make sure that the power of each piece of equipment
is turned off.
• Use cables suitable for the equipment to be connected.
• Connect the cables, fully inserting them into the
connectors or jacks. A loose connection may cause hum
and other noise.
• To disconnect the cable, pull it out by grasping the plug.
Never pull the cable itself.
• See the instruction manual of the equipment to be
connected, too.
• Insert the plug securely into the AC IN socket.
• Use one of the two AC plug holders (supplied) to securely
hold the AC plug.
Connecting the
Speakers
You can enjoy viewing with a greater sense of
presence by connecting the speakers SS-SP40FW/
32FW (not supplied). Please be sure to connect the
speakers correctly. For more details on connecting the
speakers, see the operating manual of the speakers.
For details on how to route the speaker cords, see
page 19.
Connecting the AC
Power Cord
1
Plug the AC power cord into the AC IN
socket. Then, attach the AC plug holder
(supplied) to the AC power cord.
AC
power
cord
AC plug
holder
2
Slide the AC plug holder over the cord until
it connects to the AC IN socket cover.
AC IN socket
cover
To remove the AC power cord
After squeezing the AC plug holder and freeing it,
grasp the plug and pull out the AC power cord.
GB
AC IN
socket
17
GB