T80
4.1- GENERAL PRECAUTION
OPERATORS MUST BE INFORMED OF ACCIDENT RISKS, SAFETY DEVICES AND THE
GENERAL ACCIDENT PREVENTION REGULATIONS ESTABLISHED BY
INTERNATIONAL DIRECTIVES AND BY THE LAW IN FORCE IN THE COUNTRY OF USE.
ALL OPERATORS MUST STRICTLY COMPLY WITH THE ACCIDENT PREVENTION
REGULATIONS IN FORCE IN THE COUNTRY OF USE.
EXTRAORDINARY AND ROUTINE MAINTENANCE OPERATIONS INVOLVING THE TOTAL
OR PARTIAL DISMOUNTING OF THE ACTUATOR MAY ONLY BE PERFORMED AFTER
DISCONNECTING IT FROM THE POWER SUPPLY.
DO NOT REMOVE OR ALTER THE PLATES PLACED ON THE ACTUATOR BY THE
MANUFACTURER.
DO NOT REMOVE OR BY-PASS THE SAFETY SYSTEMS ON THE ACTUATOR.
IT IS STRICTLY FORBIDDEN TO USE THE ACTUATOR FOR IMPROPER PURPOSES,
OTHER THAN THE ONE INDICATED BY THE MANUFACTURER (SEE PARAGRAPH 3.7).
IT IS STRICTLY FORBIDDEN TO INSTALL THE ACTUATOR ON THE EXTERNAL PART OF
WINDOW FRAMES EXPOSED TO THE WEATHER (RAIN, SNOW, ETC.).
IT IS STRICTLY FORBIDDEN TO USE THE ACTUATOR IN POTENTIALLY EXPLOSIVE
EX
ATMOSPHERES
KEEP THE PACKAGING AND ACTUATOR OUT OF THE REACH OF CHILDREN.
ANY TAMPERING WITH OR UNAUTHORISED REPLACEMENT OF ONE OR MORE PARTS
OR COMPONENTS OF THE ACTUATOR, OR THE USE OF UNORIGINAL ACCESSORIES
AND CONSUMABLES, MAY INCREASE THE RISK OF ACCIDENT AND THUS RELIEVES
THE MANUFACTURER OF ALL CIVIL AND PENAL LIABILITY
IF THE WINDOW FRAME IS ACCESSIBLE FROM OR INSTALLED AT A HEIGHT OF LESS
THAN 2.5 m FROM THE GROUND, AND IF IT CAN BE COMMANDED BY AN UNTRAINED
USER OR WITH A REMOTE CONTROL DEVICE, FIT AN EMERGENCY STOP SYSTEM
WHICH AUTOMATICALLY CUTS IN TO PREVENT THE RISK OF CRUSHING OR
DRAGGING PARTS OF THE BODY INSERTED BETWEEN THE MOVING AND FIXED
PARTS OF THE WINDOW FRAME.
In case of doubt as to the functioning of the actuator, do not use it but contact the
manufacturer.
VER.1.0
REV.08.06
INSTALLATION AND USE INSTRUCTIONS
SAFETY -4
EN
31