T80
The material contained in this document is provided exclusively for information
purposes and may be modified without notice.
Keep this manual and all attached documents in good condition, legible and complete;
store it in an accessible place the whereabouts of which is known to all operators.
2.5.1-
Symbols used in this manual
This symbol marks information and warnings which, if not observed, may
damage the actuator or compromise operator and/or user safety.
This signal marks information and warnings concerning areas with a potentially
EX
explosive atmosphere.
2.6-
RESERVED RIGHTS
The Manufacturer reserves all rights to this "Installation and use instructions" manual.
All the information contained herein (text, drawings, diagrams, etc.) is reserved.
No part of this manual may be reproduced and disclosed (totally or partially) in any way
(photocopies, microfilms and the like) without the written authorisation of the
Manufacturer.
2.7-
DESCRIPTION OF PERSONNEL
Users must never perform operations reserved for maintenance people or
specialised technicians.
The manufacturer declines all liability for damage deriving from failure to
observe the above requirements.
Specialised electrician:
A specialised electrician must be able to install the actuator, start it and operate it both
in normal conditions and in the maintenance mode; he/she is qualified to perform all
electrical and mechanical adjustment and maintenance operations. He/she is allowed
to work on live electrical cabinets and junction boxes.
User:
specialised person capable of operating the actuator under normal conditions by using
the relative controls. He/she must also be able to operate with the actuator under
"maintenance" in order to perform simple routine maintenance operations (cleaning),
and start or reset the actuator following an unscheduled stop.
VER.1.0
REV.08.06
GENERAL REMARKS -2
INSTALLATION AND USE INSTRUCTIONS
EN
27