Fault; Handling And Installation; Packaging And Unpacking - Angelo Po 091FR1E Bedien- Und Installationshandbuch

TROUBLESHOOTING
The appliance has been tested before being put
into service.
The information provided below is intended to as-
sist in the identification and correction of any anom-
alies and malfunctions which might occur during
use.

Fault

The heating elements do not
come on

HANDLING AND INSTALLATION

RECOMMENDATIONS FOR HANDLING AND INSTALLATION
Important
When handling and installing the appliance
comply with the information provided by
the constructor directly on the packaging,
on the appliance and in the instructions for

PACKAGING AND UNPACKING

The packaging is designed to reduce space and as
appropriate to the type of transport used.
To simplify transport, some components may be re-
moved and suitably protected and packed for trans-
port.
The packaging carries all information necessary for
loading and unloading.
When unpacking, check that all components are
present in the correct quantities and are undam-
aged.
The packaging material must be properly disposed
of in accordance with legal requirements.
FAULT
The user can solve some of these problems him-
self, but for others specific technical knowledge or
skill is required, and so they must only be carried
out by qualified staff with recognised experience ac-
quired in the specific sector of operation.
Cause
Electrical connection not made
correctly
Safety thermostat tripped
Switch faulty
use. If necessary, the person authorised to
carry out these operations must organise a
"safety plan" to protect the people directly
involved.
- 13 -
Remedy
Check the connection of the
electrical wires
Carry out the appliance reset (see
page 10)
Replace the switch
6
7
IT
GB
DE
FR
ES
IDM-3960200170.tif
English