Operating Settings Configuration; Home Screen; Test Mode; Auto Test - Chauvet Professional Maverick Storm 1 Wash Schnellanleitung

Operating Settings Configuration

Home Screen

The Maverick Storm 1 Wash has a home screen that shows the current control protocols, personalities,
starting addresses, IP addresses, and universes. To see the home screen, press <MENU> repeatedly until it
shows on the display. From the home screen, press any of the menu buttons to immediately jump to any part
of the menu (e.g., the personality, starting address, or universe), or press <ENTER> to reach the main menu.

Test Mode

Auto Test

To perform an auto test of the Maverick Storm 1 Wash functions, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Auto test.
5. Press <ENTER>.

Manual Test

To test the functions of the product manually, do the following:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Manual Test.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select the function to test, from Pan, Tilt, P/S Speed, Red, Green,
Blue, White, CTC, Color, Pattern, LED Macro, LED Ma. Speed, LED Ma. Fade, Background,
Background Dim., Dimmer, Shutter, Function, or Zoom.
7. Press <ENTER>.
8. Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value of the tested
function.
9. Press <ENTER>.

Setup

To reach the Setup menu, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Setup.
3. Press <ENTER>.

Network Settings

To reach the Network Settings menu, do the following:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Network Settings.
3. Press <ENTER>.
IP Mode
The IP address of the Maverick Storm 1 Wash can be set manually, by the network, or to a preset static
address specific to each product. To set the IP Mode, follow the instructions below:
1. Navigate to the
2. Use <UP> or <DOWN> to select IP Mode.
3. Press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from:
• Manual – set the IP address with the control panel
• DHCP – the network sets the IP address
• Static – a preset address specific to each product
5. Press <ENTER>.
Page 49 of 306
Home Screen
Home Screen
Home Screen
menu.
Network Settings menu.
shows on the display. Press <ENTER>.
shows on the display. Press <ENTER>.
shows on the display. Press <ENTER>.
Maverick Storm 1 Wash User Manual Rev. 2
Operation