Symbols On Control Panel; Full Control Version; Easy Control Version - Primus 11 Bedienungsanleitung

3. SYMBOLS ON CONTROL PANEL

3.1. FULL CONTROL VERSION

OPERATION BUTTONS
START
- Starting up a program
- Continue an interrupted program
- Advancing the program step by step
STOP
- Interrupting a program
- Finishing a program
PROGRAM SELECTION
- Selecting a program number
SERVICE
- shows the states and the total number
of cycles of the machine
REVERSE
- Switch On/Off Reverse function.
ARROW UP
- Increasing a value
ARROW DOWN
- Decreasing a value
DRYING TIME
- Setting for drying time
DRYING TEMPERATURE
- Setting for temperature

3.2. EASY CONTROL VERSION

OPERATION BUTTONS
START
- Starting up a program
- Continue an interrupted program
- Advancing the program to the next sequence
PROGRAM TEMPERATURE HIGH
- Program selection button, High temperature
PROGRAM TEMPERATURE MEDIUM
- Program selection button,
Medium temperature
508 992 PUBLICATION DATE 08/05
COOLDOWN TIME
- Setting for cool down time
MOISTURE LEVEL
- Setting for residual moisture level
PROGRAM BUTTONS
ARROW UP
- Selecting the next element of an item
list
- Increasing a value
ARROW DOWN
- Selecting the previous element of an
item list
- decreasing a value
ARROW LEFT
- Selecting the previous menu item
ARROW RIGHT
- Selecting the next menu item
ENTER
- Selecting the next menu item
- Confirmation of a new value or list
element and going over to the next
menu item
PROGRAM TEMPERATURE LOW
- Program selection button
Low temperature
ALARM INDICATION
- Red light is flashing when
an alarm occurs
USER'S MANUAL 9