Citizen iDP3550 Bedienungsanleitung Seite 118

ESC "c" "4" n
[Function] Selecting the paper near end sensor valid for print stop
[Code] <1B>H<63>H<34>H n
0 ≤ n ≤ 255
[Range]
[Outline] This command selects the no-paper detector state in which printing should be stopped.
[Default] n = 1
ESC "c" "5" n
[Function] Selecting the panel switch enable/disable
[Code] <1B>H <63>H <35>H n
0 ≤ n ≤ 255
[Range]
[Outline] This command enables/disables the panel switches. n is valid only for the least significant
bit.
[Caution] If the panel switches are disabled with this command, the LF switch will be disabled.
Therefore, the paper cannot be fed by the LF switch.
[Default] n = 0
Bit Function
0 Paper near end
1 Undefined
2 Undefined
3 Undefined
4 Undefined
5 Undefined
6 Undefined
7 Undefined
Setting n = 1 disables the panel switches.
Setting n = 0 enables the panel switches.
0
Disabled
−
−
−
−
−
−
−
103
iDP3550/3551 User's Manual
Value
1
Enabled
−
−
−
−
−
−
−
CITIZEN