ESC "2"
[Function]
Setting the standard line feed width
[Code]
<1B>H <32>H
[Outline]
This command sets the following line feed width.
For charactor type:
For graphic type:
ESC "3" n
[Function]
Setting the line feed width in minimum pitch increments
[Code]
<1B>H <33>H n
[Outline]
This command is only effective for graphic type. This command sets the line feed width to
n/9 inch.
[Default]
n = 2
ESC "@"
[Function]
Initializing the printer
[Code]
<1B>H <40>H
[Outline]
This command cancels various conditions set after power-on to initializes the printer to the
conditions having existed at power-on.
external device drive pulse width are not initialized.
segments are not re-read.
1/6 inch.
2/9 inche
However, the print buffer, input buffer, and
99
iDP3550/3551 User's Manual
(Character Type)
(Graphic Type)
The settings of the DIP switch
CITIZEN