Disposal; Disassembly For Disposal; Returns; Information - Gemü 536 Original Einbau- Und Montageanleitung

16

Disposal

All valve parts must be
G
disposed of according to
relevant local or national
disposal regulations /
environmental protection
laws.
Harmful residues and
G
outgassing of diff used
media must be taken into
consideration.
16.1

Disassembly for disposal

WARNING
The actuator cover is under spring
pressure!
® Risk of severe injury or death!
Only open the actuator with a suitable
G
press.
1. Disconnect the control air supply/remove
the control air tubes.
2. Clamp the actuator in a press.
3. Remove all hexagon nuts 35, cylindrical
screws 12, spring washers 13 and other
washers 33.
4. Slowly reduce pressing force.
5. Remove the actuator cover 10.
10
7
21
9
6
14
50
41
48
16
49
47
4
17
15
17

Returns

Clean the valve.
G
Request a goods return declaration form
G
from GEMÜ.
Returns must be made with a completed
G
goods return declaration.
If not completed, GEMÜ cannot process
credits or

repair work

but will dispose of the goods at the
operator's expense.
Note for returns:
Legal regulations for the protection
of the environment and personnel
require that the completed and
signed goods return declaration
is included with the dispatch
documents. Returned goods can
be processed only when this
declaration is completed.
18

Information

Note on staff training:
Please contact us at the address
on the last page for staff training
information.
Should there be any doubts or
misunderstandings in the preceding text,
the German version of this document is the
authoritative document!
12
13
33
35
27 / 32
536