Pettec Trainer Advance 2.0 Handbuch Seite 13

Fit the collar
The trainer should be fitted so that the contact area presses firmly against the dog's skin.
When properly fitted, you should be able to fit a finger or two snugly in between the collar
and the dog's skin. When properly fitted, the trainer should not move on the dog. The best
location for the trainer is either side of the dog's windpipe.
A loose fit can allow the trainer to move around on the dog's windpipe. When this happens,
the contact area may rub the skin and cause irritation. If the trainer is too tight, the dog
may have difficulty breathing.
24
How to find the best vibration level
The PetTec Remote Vibration Trainer Advance offers up to 16 different vibration levels.
Level 1 is the weakest signal and level 16 the strongest. The level of vibration best suited
for your dog depends on your dog's temperament and threshold for vibration. Always start
at the lowest level and work your way up.
The appropriate level can be found when the dog responds to the vibration with a mild
reaction, such as a tensing of the neck muscles. The vibration level may vary depending on
the training situation. When highly distracted, dogs will require a higher level of vibration.
How to maximize the distance
The unit has a 600 meter range. The range may vary depending on the way the remote
control is held. Hold the remote control away from your body to receive the greatest ran-
ge. For maximum signal strength, keep the devices properly charged.
LCD and LED indicator
Indicates vibration intensity ranging from 1 – 16, and appears in the
middle part.
Indicates the active trainer and appear in the left part.
Indicates battery's power level. Note: The battery indicator will flash
every second to indicate low battery.
25