Parts Name And Function - HiTi P750L Benutzerhandbuch

Chapter 2. Installing and Set Up

Parts Name and Function

1
<Front View>
NO. Name
Operation Panel
1
Front Cover
USB Slot (Type A)
4
USB Slot (Type B)
Power Connector
5
Power Switch
7 Paper Setting Lamp
5
<Internal View>
Control buttons, LCD and printer status display lamps are
located on the panel.
Open the front cover when replacing an ink ribbon or paper,
or when performing maintenance.
For use of FW upgrade. DO NOT charge hand-held devices.
To be used to connect the USB cable.
To be used to connect the power cord.
This switch turns on/off the power of the printer. When the "|"
marked side of the switch is pressed, the power is turned on.
When the "○" marked side of the switch is pressed, the power
is turned off.
<Caution>Once the printer is turned off, wait at least 3
seconds before turning it on again.
When setting the paper, insert the paper until the lamp is lit.
2 - 2
HiTi P750L user manual
<Rear View>
Function