Chapter 4. Routine Maintenance - HiTi P750L Benutzerhandbuch

Chapter 4. Routine Maintenance

Cleaning of Thermal Head, and Roller
By using thermal transfer technology, daily maintenance is not really necessary if the printer has
been used properly. However, in order to keep the best print quality, it is highly recommended to
clean Thermal Head and Roller regularly.
Caution: Improper cleaning of the thermal head may damage the thermal head. Please
contact HiTi dealers for cleaning and maintenance of the thermal head.
Make sure the power is turned off and the thermal head has been sufficiently
cooled down before cleaning rollers.
Do not leave fingerprints on the heating element, it can damage the thermal head.
Be careful not to hurt by the protrusions of the printer.
1.Use double side adhesive tape to clean the rubber
section of the guiding roller.
2. Use double side adhesive tape to clean the r ubber
section of the platen roller (paper feed side).
4 - 1
HiTi P750L user manual