MAINTENANCE AND USE MANUAL
Fig. 10: Press ON/OFF (2) to switch on the machine.
Fig. 11: Rotate the tap (7) so the safety plug (8)is facing
upwards.
Fig. 12: Remove the plug by rotating it anticlockwise.
Fig. 13: Press the pushbutton (6) and extrude the fluid
until homogeneity between "BASE" and "CATALYST" is
obtained.
DOUBLEMIX
EN
2
10
Figure
8
7
11
Figure
12
Figure
6
DOUBlemix
13
Figure
111 of 188