Trotec S280 Bedienungsanleitung Seite 42

4. Set the Image Settings.
- Press the UP
or DOWN arrow
t
on the omni selec-
tor to select a field
to change.
- Press the 3LEFT or RIGHT 4arrow on the omni
selector to set the values.
About the Image settings:
Auto adjust
Sets the function of A key. There are three options:
Level and Span, Level, Span.
- Level und Span
The camera will automatically adjust the level
(brightness) and span (contrast) of the image to
the optimum setting.
- Level
The camera will automatically adjust the level
(brightness) of the image.
- Span
The camera will automatically adjust the span
(contrast) of the image.
Continuous adj
Sets whether or not the brightness and contrast of
the the image shown on the screen are adjusted
automatically.
- Level and Span
The brightness and contrast is adjusted automatically.
- Level
The brightness is adjusted automatically.
- None
The brightness and contrast will not be adjusted
automatically.
Color scale
Sets the pseudo color of the thermal. The camera pro-
vides 6 palettes: Iron, Iron inverted, Rainbow, Feather,
Grey and Grey inverted.
B - 13
s
Operating manual – Infrared camera
Saturation color
Sets the display of the part that is beyond the tempera-
ture range of the color scale.
- On
Sets the saturation color of the image in green or black.
- Off
Sets no saturation color of the image.
Windows style
Sets the style of built-in menu system.
- Standard
Sets the built-in menu system in standard style.
- Skyblue
Sets the built-in menu system in vogue style.
Setting object parameter
1. Press the MENU/ENTER key.
2. Press the 3 Left or
Right 4arrow on the
omni selector to select
the [Analysis] menu.
3. Press UP and DOWN
s
arrow on the omni se-
t
lector to select [Obj par],
then press the MENU/EN-
TER key.
4. Setting object parameter.
- Press the UP
s
DOWN arrow on the
t
omni selector to se-
lect a field to change.
- Press the 3LEFT or
RIGHT 4 arrow on
the omni selector
to set the values.
or
G