Motion CM-04 Gebrauchsanweisung Seite 22

22 Channel select 5 channel remote
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
Select the channel
22.1
from which the
blinds must be
copied.
All blinds in the selected
22.3
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or a different
remote. Select a new
channel on the (new)
remote.
23 Channel select 15 channel remote
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
1
Select the channel
23.1
you would like to
copy.
All blinds in the selected
23.3
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or on different
remotes. Select a channel
on a (new) remote.
M OT I ON C M- 0 4 T U B U L AR M O TO R
To activate
22.2
channel select,
simultaneously
hold the channel
selection button
and press the pair
button.
Press the pair
22.4
button on the (new)
remote to pair the
blinds with the new
channel.
To activate
23.2
channel select,
simultaneously hold
the channel selection
button and press the
pair button.
3
Press program
23.4
button on the (new)
remote to pair the
blinds with the
(new) remote.
+
To exit channel
22.5
select, go back to the
channel selected at
step 22.1 and repeat
step 22.2
1
+
To exit channel
23.5
select, choose
the channel you
selected at step 23.1
and repeat step 23.2