Operation - Klarstein 10030683 Bedienungsanleitung

Suggested Pan dimensions for induction hob
The cooking zones are, up to a limit, automatically adapted to the diameter of the pan.
However, the bottom of this pan is suggested to have a minimum of diameter according
to the corresponding cooking zone. To obtain the best efficiency of your hob, please
place the pan in the centre of the cooking zone.
Suggested size of cookware (bottom diameter)
Cooking zone Minimum diameter bottom
160 mm
180 mm
210 mm
280 mm
Flexible zone

OPERATION

To start cooking
After the hob has ben connected to electricity and
power on. Touch and hold the ON/OFF button for
1 about 3 seconds till you hear a "beep" to turn the hob
on. Now the hob enters into standby mode, all heat
setting indicators and timer setting indicators show "-".
Place a suitable pan on the cooking zone you wish to
2 use. Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
Touch the heating zone button to select the cooking
3 zone you want to use. The heat setting indicator of the
selected zone will flash.
Maximum diameter bottom
140 mm
140 mm
160 mm
230 mm
200 mm
160 mm
180 mm
210 mm
280 mm
400 x 200 mm
EN
41