Recommended Separation Distances; Cable Lengths - Acteon I-SURGE Benutzerhandbuch

12.4 RECOMMENDED SEPARATION DISTANCES

The device is intended for use in an electromagnetic environment in which radiated radiofrequency disturbances
are controlled.
The device user and/or installer can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile radiofrequency communications equipment emitters and the device,
according to the maximum output power of the equipment, as recommended in the table below.
Rated max. power of the emitter
(W)
0.01
0.1
1
10
100
For emitters rated at max. power not listed above, the recommended separation distance d in meteres (m) can
be estimated using the equation applicable to the frequency of the emitter, where P is the max. power rating of
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These specifications may not be applicable in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and persons.

12.5 CABLE LENGTHS

Cables and
accessories
Handpiece cords
Footswitch cord
Less than 3m
Power supply
cord
Separation distance in metres (m) according to emitter frequency
150kHz to 80MHz
d = 1.2
the emitter in watts (W) according the manufacturer.
Maximum
length
RF emission, CISPR 1 - Class A/Group 1
Harmonic current emission: IEC61000-3-2
Voltage fluctuation: IEC61000-3-3
Immunity to electrostatic discharge: IEC61000-4-2
Immunity to electrical fast transients/bursts: IEC61000-4-4
Immunity to surges: IEC61000-4-5
Immunity to voltage dips, short interruptions and voltage variations:
IEC61000-4-11
Immunity to conducted disturbances induced by radiofrequency fields:
IEC61000-4-6
Immunity to radiated radiofrequency electromagnetic fields: IEC61000-4-3
80MHz to 800MHz
 P
0.12m
0.38m
1.2m
3.8m
12m
Complies with:
800MHz to 2.5GHz
d = 1.2  P
0.12m
0.38m
1.2m
3.8m
12m
d = 2.3  P
0.23m
0.73m
2.3m
7.3m
23m
24