Adding/Deleting Rts And Rt Control - SOMFY Oximo RTS Gebrauchsanleitung

Oximo RTS
5.1.3 Modifying the favourite position
1) Place the roller shutter into the required new favourite
position (my) by pressing the up or down button on the
RTS control point.
2) Press the STOP/my button until the roller shutter moves
up and down:
The new favourite position has been programmed.
5.1.4 Deleting the favourite position
1) Press the STOP/my button:
The roller shutter starts to move and stops in the
favourite position (my).
2) Press the STOP/my button until the roller shutter moves
up and down:
The favourite position has been deleted.

5.2 Adding/Deleting RTS and RT control

points
The procedure for adding or deleting a control point is the
same.
5.2.1 RTS control point
- Find an RTS control point (K) programmed in the motor.
1) Press and hold the PROG button on the programmed
RTS control point (K) until the roller shutter moves up and
down:
The motor is in programming mode.
2) Briefly press the PROG button on the RTS control point
(L) to be added or deleted:
The roller shutter moves up and down,
The RTS control point has been programmed or
deleted from the motor.
5.2.2 Inis RT / Inis RTS control point
- Find an RTS control point (K) programmed in the motor.
1) Press and hold the PROG button on the programmed
RTS control point (K) until the roller shutter moves up and
down:
The motor is in programming mode.
2) Form a contact between the metal PROG plate and the
battery bracket on the Inis RT/Inis RTS (M):
The roller shutter moves up and down,
The Inis RT/Inis RTS (M) has been programmed or
deleted from the motor.
50
1
or
1
my
Adding
1
PROG.
K
Deletion
1
PROG.
K
Adding
1
PROG.
K
Deletion
1
PROG.
K
Copyright © 2008-2009 Somfy SAS. All rights reserved.
2
my
2
2
PROG.
L
2
PROG.
L
M
2
PROG.
M
M M
2
PROG.
M