Operation / Navigation - ergoline ESPRIT 770 Dynamic Power Gebrauchsanweisung

Operation / navigation

The sunbed is operated with the buttons on the operating handle in the
canopy.
Switch tanning on and off, pause.
Confirm task.
Whether this button is available depends on the task
selected and is shown in the display.
Select device function
(go to pictogram)
Select sub-function (if available)
Change setting (progress bar display)
Change music track or studio channel (in default mode)
Whether this button is available depends on the task
selected and is shown in the display.
All pictograms on the display unit are illuminated in default mode after
starting up the sunbed.
After selecting a task the corresponding pictogram flashes and the set-
ting or selection options for the chosen task are shown in the display.
(See "Operating structure" Page 116.)
Note:
If a button is not pressed within 8 seconds, the settings return to
default mode.
115