General Information - Hach BL9000 Bedienungsanleitung

Table of contents
Specifications on page 3

General information

on page 3
Installation on page 6
Operation on page 11
Specifications
Specifications are subject to change without notice.
Specification
Dimensions (W x H x D)
Enclosure
Materials
Weight
Power requirements
Power cable
Protection class
Overvoltage category
Operating temperature
Storage temperature
Range
Accuracy
Temperature error
Compensated temperature range –10 to 60 °C (14 to 140 °F)
Air inlets
Bubbler line requirement
Bubbler line high-pressure purge
Control instruments
Certifications
Warranty
General information
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
make changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer's website.
Troubleshooting
Replacement parts and accessories
Details
10.7 × 24.1 × 12.7 cm (4.2 × 9.5 × 5.0 in.)
IP 68; NEMA 4X and 6P
Enclosure: PC/ABS; bubbler line connector: stainless steel; mounting bracket:
stainless steel; cable jacket: PVC
1.36 kg (3 lbs)
12 VDC, 0.5 A
1.83 m (6 ft), 0.95 cm (0.375 in.) diameter
III
I
–10 to 60 °C (14 to 140 °F)
–40 to 60 °C (–40 to 140 °F)
0.003 to 3.5 m (0.01 to 11.5 ft)
±0.003 m (0.01 ft) at 25 °C (77 °F), factory calibration with static potable water
Within compensated temperature range: ±0.0003 × level (m) × temperature
deviation from 25 °C; ±0.00017 × level (ft) × temperature deviation from 77 °F
Bubbler inlet port and reference port (with inline desiccant, 10-micron filter);
0.95 cm (3/8-in.) barb fittings for remote air inlets
0.32 cm (1/8-in.) ID
Manual or automatic at programmed intervals
FL1500 flow logger only
CE
1 year (EU: 2 years)
on page 16
on page 17
English 3