Driving In The Vehicle - Kärcher CWB 3 Originalbetriebsanleitung

Emergency stop button
1
Control voltage/initial position button
2
1. Unlock the emergency off button by pulling it.
2. Press the blue control voltage/initial position button on the
control panel.
In the initial position, the upper green "Forwards" lamp on the
positioning light lights up. The system is now ready for opera-
tion, the vehicle to be washed can now be driven in.
Log in the user on the display
1. Select Settings/User Administration in the main menu.
The available users are displayed.
2. Select the desired user.
The dialogue for entering the code opens.
3. Enter and confirm the code.
The symbol for the currently logged-in user is displayed in the
top line.
Note
The user level switches automatically back to the normal User
level after 30 minutes of inactivity.
Preparing the vehicle
ATTENTION
Risk of damage to vehicles when using the CareTouch
brushes
Equip the system with a high pressure attachment kit or pre-wash
the vehicles when using the CareTouch brushes.
ATTENTION
Damage to the system and the vehicle
To prevent damage to the vehicle, take care to ensure that the fol-
lowing measures are taken before starting the system.
4. Close all windows, doors and sunroofs.
5. Retract all antennas, fold them towards the rear or remove
them.
6. Fold in any large or wide projecting mirrors.
7. Check the vehicle for any loose vehicle parts and remove
these, e.g.:
 Trim strips
 Spoiler
 Bumpers
 Door handles
 Exhaust pipes
 Wind deflectors
34
 Tarpaulin ropes
 Rubber seals
 Externally mounted sun visors
 Luggage racks
The positioning light assists the customer in positioning the vehi-
cle correctly.
Drive forwards
1
Stop, position OK
2
Drive in reverse
3
1. Position the vehicle straight ahead and centrally between the
guide rails.
1. Switch off the motor.
2. Engage a gear.
3. With an automatic transmission, select "P".
4. Apply the handbrake.
5. Check that all instructions in Preparing the vehicle have been
followed.
6. Exit the vehicle (all persons).
7. Start the washing program.
At the wash card/code reader
Note
Operation with a wash card/code reader is described in the sep-
arate operating instructions for the wash card/code reader.
Start the program on the display
1. Press the "Wash" button.
English

Driving in the vehicle

After positioning
Starting the program