Accessories; Box Content - Carrier 80HMA-M03 Installationsanleitung

Introduction

Accessories

Code Description
33AW-RAS02 Remote outdoor sensor
33AW-CB02 Communication kit
33AW-CS3 Additional user interface
80HMA-9001 2 Zone kit
80HMA-9002 Pool kit
80HMA-9003 Pump kit
80HMA-9004 BPHE kit 8kW
80HMA-9005 BPHE kit 16kW
80AW9023 Domestic hot water 3 way valve and actuator
80AW9024 Floor heating thermal cut off
60STS020E03 Domestic hot water tank 200lt, 1 spiral
60STS030E03 Domestic hot water tank 300lt, 1 spiral
60STD020E03 Domestic hot water tank 200lt, 2 spirals
60STD030E03 Domestic hot water tank 300lt, 2 spirals

Box Content

Refer to pic. 1 for the content of the box:
Comfort Module
Wall Bracket
Replecement cap for shifted user interface
Comfort Module manual
User interface manual
Safety information manual
Comunication board 33AW - CB02 for 30AWH heat pump
Notes
Additional outdoor temperature sensor, to
optimize sensor placement
Needed to communicate with 30AWH heat pump
series. To be installed in 30AWH Heat pump
To control the room comfort for each zone
To manage 2 zone independently
To manage swimming pool heating
To add a water pump in the Comfort Module to
increase the available head pressure
To add an heat exchanger in the Comfort
Module to separate primary from secondary
loop. Heat pump up to 8 kW
To add an heat exchanger in the Comfort
Module to separate primary from secondary
loop. Heat pump up to 16 kW
To heat domestic water using to Comfort Module
See EN1264-4, paragraph 4.2.4.1
Tank to produce domestic hot water. With 1
spiral and 3,3kW electric heater included
Tank to produce domestic hot water. With 1
spiral and 3,3kW electric heater included
Tank to produce domestic hot water. With 2
spirals and 3,3kW electric heater included
Tank to produce domestic hot water. With 2
spirals and 3,3kW electric heater included
3
80HMA