Co Detector Placement - Smartwares IAN 317088 Montage-, Bedienungs- Und Sicherheitshinweise

Gas type reported:
Sensor life:
Trigger value:
Operating temperature:
Humidity:
Alarm volume:
Expected battery life:

CO DETECTOR PLACEMENT

The carbon monoxide detector was developed to detect toxic CO
gasses which are emitted from incomplete combustion in e.g. ap-
pliances, heaters, fireplaces and exhaust fumes. A single storey
house should at a minimum be protected by one detector inside
each bedroom or in the hallway to the bedrooms.
Install the detectors as close as possible to the sleeping area and
verify the alarm is audible. A multi-storey house should at a minimum
be protected by one detector per storey.
carbon monoxide
7 years
50 ppm (between 60–90 min.)
100 ppm (between 10–40 min.)
300 ppm (within 3 min.)
0 °C ~ 45 °C (storage: -20 ° ~ 50 °C
± 2 °C)
0 % ~ 90 % RH (storage: 0 % ~ 70 % RH)
>85 dB from 1 m
min. 1 year
GB/IE/NI 7