Using Olympus Master 2; Connecting The Camera To A Computer - Olympus STYLUS TOUGH-8000 Basic Bedienungsanleitung

Using OLYMPUS Master 2

System requirements and
installation of OLYMPUS
Master 2
Install the OLYMPUS Master 2 software by
referring to the included installation guide.
Connecting the camera to a
computer
1
Make sure the camera is turned off.
●
The monitor is off.
2
Connect the camera to a computer.
●
The camera automatically turns on.
USB cable (supplied)
Connector cover
You can charge the battery by selecting
[EXIT] and pressing the o button.
The [USB] screen above does not appear
and charging may automatically start in
cases where there is an insuffi cient charge
or the camera is connected to a computer
via a USB hub.
Locate the position of the USB port by
referring to your computer's instructions
manual.
18 EN
Multi-connector
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET OK
3
Use EF to select [PC], and press
the o button.
●
The computer automatically detects the camera as
a new device on the fi rst connection.
Windows
After the computer detects the camera, a
message indicating the completion of the
setting appears. Confi rm the message and
click "OK". The camera is recognized as a
removable disk.
Macintosh
When iPhoto started, exit iPhoto and start
OLYMPUS Master 2.
While the camera is connected to the
computer, shooting functions are disabled.
Connecting the camera to a computer via a
USB hub may cause unstable operation.
When [MTP] is set for the submenu that
appears by pressing H after selecting [PC]
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
Starting OLYMPUS Master 2
1
Double-click the OLYMPUS Master 2
icon.
Windows
appears on the desktop.
Macintosh
appears in the OLYMPUS Master 2 folder.
●
Browse window appears after starting the
software.
When you start OLYMPUS Master 2 for the
fi rst time after installation, "Default Settings"
and "Registration" screens appear. Follow
the instructions on the screen.