Disconnecting Electrical Heating, Terminal #55 (Output); If The Sauna Heater Does Not Heat Up; Control Unit T2 - Helo FONDA DUO Produkthandbuch

Operating and installation instructions Fonda duo

2.6 Disconnecting electrical heating, terminal #55 (output)

The electric heating disconnecting applies to homes with an electric heating system.
The sauna heater outputs 230-240V to terminal #55 when the heater is activated, i.e. this signal can be used to
(partly) deactivate house heating when the sauna heater switches on the current to the heating elements. May be
used in case the main fuses can´t take the full load of a sauna heater and electric space heaters.

2.7 If the sauna heater does not heat up

If the sauna heater does not heat up, check that
- the current is switched on
- the heater's main fuses are intact
- that the control panel is not displaying an error message. If the control panel displays an
error message read the operating instructions for the control panel.

2.8 Control unit T2

Meaning of the symbols on the screen:
Display
Activated functions
Touch screen with
buttons
Starting and stopping the heater
Setting the sauna room's temperature. Reference value 20–110 °C
Setting the sauna room's humidity. Reference value 0–10
Setting preselected time. It is possible to set the start time 0–24 hours in advance.
Settings menu. Option of setting language, time and other details.
Motion
detector
6
OK