Starting The Appliance - domoova DRV20 Benutzerhandbuch

EN
Operating the appliance
Installing the cleaning pad
A cleaning pad can be attached under the robot to deep clean hard
floors in the home.
Figure 1
Place the cleaning pad on its support (Figure 1). Attach the support
underneath the robot using the grooves provided (Figure 2). Start
the robot.
NOTE: The cleaning pad can be used dry or be slightly moistened with the floor
detergent of your choice.

Starting the appliance

Press the appliance's ON/OFF button to take it off standby. The
robot's indicator light is continuous blue. Press a second time to start
a cleaning cycle. The robot starts its cleaning cycle in AUTO mode.
NOTES:
• If the robot is on standby, press the ON/OFF button on the robot to start a
cleaning cycle.
Figure 2
12