Inserting The Remote Mount Ethernet Control Head (Ech) With The Din Mount Bracket Into The Din Frame; Adding Extra Accessories To The Ethernet Control Head (Ech) And Telephone Style Control Head (Tsch) - Motorola MTM800 FuG Installationshandbuch

Inserting the Remote Mount Ethernet Control Head (eCH) with the DIN
Mount Bracket into the DIN Frame
When and where to use: Follow these steps to insert the remote mount enhanced control head with the DIN mount
bracket.
Procedure:
1 Insert the mounting frame into the DIN Mount Bracket and retain it by bending back the relevant fixing tabs.
2 Use all six tabs, if necessary, to hold it in place.
Note:
The tabs are easily bent back by twisting a large flat-bladed screwdriver into the slot behind the tabs.
For a more secure installation, the top and rear of the frame should also be secured with screws.
The demount tool can be used as an aid to mounting as well as demounting.
Figure 17: Mounting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into
the DIN Frame
Adding Extra Accessories to the Ethernet Control Head (eCH) and
Telephone Style Control Head (TSCH)
The Accessories Expansion RECH Y-Cable (PMKN4133_) allows to connect extra accessories.
Radio Installation | 59
| | Send Feedback