Figure 30: Downward Movement - Motorola MTM800 FuG Installationshandbuch

72 | Radio Installation
10 Slide the Motorcycle Mount Enhanced Control Head onto the mounting trunnion until it snaps into place.
11 Tighten the screws at both sides of the trunnion. After a few turns, tilt the Motorcycle Mount Enhanced Control
Head for an optimum view of the display. Then, complete the tightening of the screws.
12 There are two ways to mount the motorcycle trunnion, each limited to a 77 degree of allowable movement, as
shown in the following picture.
Figure 29: Upward Movement

Figure 30: Downward Movement

Send Feedback | |