Changing The Dvd Default Settings; Understanding The Menu Structure; Using The Menu; Overview Of The Main Menu - AEG CTV 4952 LCD/DVD/DVB-T Bedienungsanleitung

Understanding
the menu structure

Using the menu

Overview of the main menu

Changing the DVD default settings

A large number of default settings can be comfortably changed via the
screen menu.
Press the SETUP/ExIT-button (Fig. 2/21) on the remote control to start
the menu for changing the default settings.

NOTE:
Many of these default settings can be changed via both the remote
control and the menu. The difference is: If you change the default
settings via the remote control, these changes will only be valid until
the DVD-Player is switched off or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:

Main menu:
The main level is represented by graphical symbols.

Sub-menu:
The corresponding sub-menu options can be found under each of
the main menu options.
Navigation and selection
 Use the Cursor Buttons (Fig. 2/21) (/) on the remote control to
browse through the main menu.
 In contrast to this, you must use the Cursor Buttons ( / ) to
move in the sub-menu.

Select a menu option with the ENTER-button (Fig. 2/22).

Use the ENTER-button also to select an option (e.g. "UL STYLE 3" in
the illustration on the left). The selected option (in the example „UL
STYLE 3") is now highlighted.

DVD-specific settings (1)

DVB-T-specific settings (2)

System settings (3)

Exit the menu (4)

NOTE:

The DVD settings menu can only be selected in DVD mode.

Some of the menu settings are only available in stop mode (depen-
ding on the DVD).
English
59