Temperature Limitation; Maintenance - HANSGROHE 15740000 Montageanleitung

Assembly
Attention! The fitting must be installed, flushed and
tested after the valid norms.
Adjustment
Correction is necessary if the temperature measured
at the take off point differs from the temperature set
on the scale (please see page 5).

Temperature limitation

The temperature is limited by the safety check to 38°
C (100° F). If a higher temperature is required, it is
possible to override the safety stop by depressing
the safety button.
Safety Function
The desired maximum temperature for example max.
42° C can be pre-set thanks to the safety function
(please see page 5).
Technical Data
Operating pressure:
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.: 65° C
Rate of flow 0,3 MPa:
Running time (factory preset):

Maintenance

There is no special maintenance for thermostats.
The non return valves (8) must be checked regularly
according to DIN EN 1717 in accordance with na-
tional or regional regulations (at least once a year).
At this time, please also check the filter (6.1) situated
on the MTC-thermoelement (6). After assembling the
MTC-thermoelement, it is necessary to check the water
temperature at the take off point as described under
the headline „adjustment". Before the adjustment,
please check, if the warm water supply is activated
and the maximum temperature of the warm water is
available at the take off point.
1
English
max. 0,8 MPa
1,6 MPa
max. 80° C
approx. 24 l/min
20 sec.
To guarantee the smooth running of the thermostat, it
is necessary from time to time to turn the thermostat
from total hot to total cold.
Spare parts (see page 2)
1 thermostat handle
2 cover plate
3 sleeve
4 fixing screw
5 sub plate
6 thermostat cartridge
7 noise reduction
8 non return valve
9 thermostat handle
10 battery 6 V / 1300 mAh Lithium 97399000
11 extension set 25 mm
12 extension set 22 mm
13 electronics
14 solenoid valve
XXX = Colours
000 chrome plated
800 steel
35391800
97440XXX
96439XXX
96454000
96538000
94282000
94073000
94074000
36391000
13595000
13596XXX
97139000
96904000