If The Fan Coil Does Not Work - AERMEC FCA 32 Bedienungsanleitung

PROBLEM AND REMEDY
PROBLEM
Feeble air discharge
It does not heat
It does not cool
The fan does not turn
Condensation on the unit
cabinet.
For anomalies don't hesitate, contact the aftersales service immediately.
PROBABLE CAUSE
Wrong speed setting on the control panel
Blocked filter
Obstruction of the air flow (inlet and/or outlet)
Poor hot water supply
Wrong setting on control panel
Poor chilled water supply
Wrong setting on control panel
No current
The water has not reached operating temperature.
The limit conditions of temperature and humidity indica-
ted in the Technical booklets (Operating limits) have
been reached.
REMEDY
Select the speed on the control panel
Clean the filter
Remove the obstruction
Control the boiler
See control panel settings
Control the chiller
See control panel settings
Control the power supply
Please check up the boiler or the chiller.
Check up the thermostat settings.
Increase the water temperature beyond
the minimum limits indicated in the
technical booklet.
GB
25