Specifications; Ec Declaration Of Conformity; Specific Safety Rules - Makita 6905B Bedienungsanleitung

ENGLISH
1-1. Switch trigger
2-1. Side grip
3-1. Socket
3-2. Anvil

SPECIFICATIONS

Capacities
No load speed (min
Impacts per minute
Max. fastening torque
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for fastening bolts and nuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model 6905B
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 95 dB (A)
sound power level: 106 dB (A)
Uncertainty: 3 dB(A)
Wear ear protection.
The typical weighted root mean square acceleration
2
value is 5 m/s .
These values have been obtained according to
EN60745.
For Model 6906
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 94 dB (A)
sound power level: 105 dB (A)
Uncertainty: 3 dB(A)
Explanation of general view
4-1. Socket
4-2. O-ring
4-3. Pin
5-1. Limit mark
Model
Standard bolt
High tensile bolt
Square drive
-1
)
Overall length
Net weight
Safety class
6905B
M12 - M20
M12 - M16
12.7 mm
1,700
2,000
294 N.m
270 mm
2.7 kg
ENE036-1
The typical weighted root mean square acceleration
value is 3 m/s
ENF002-1
These values have been obtained according to
EN60745.
Model; 6905B,6906
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 89/336/EEC, 98/37/EC.
ENG006-2
000087
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
ENG006-2
to recipro saw safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
1. Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
3
6-1. Screwdriver
6-2. Brush holder cap
/II
Wear ear protection.
2
.
Yasuhiko Kanzaki CE2005
Director
6906
M16 - M22
M16 - M20
19 mm
1,700
1,600
588 N.m
327 mm
5.0 kg
/II
ENH101-5
GEB009-2