Other Convenient Functions - Sharp R-244 Bedienungsanleitung

MICROWAVE COOKING
NOTE:
• When the oven starts, the oven lamp will illuminate.
• If the door is opened during cooking/defrosting to stir or turn over food, the cooking
time on the display will stop automatically. The cooking/defrosting time starts to count
down again when the door is closed and the ENTRY dial (START/QUICK START button)
is pressed.
• When cooking/defrosting is complete, the display will show "End". Open the door and
close, or press any button, the time of day will reappear on the display, if the clock has
been set.
• If you wish to know the power level during cooking, press the POWER button. The cur-
rent power level will displayed for 3 seconds.

OTHER CONVENIENT FUNCTIONS

1. PRESET
With this function, you can preset the programme and the microwave oven will start to work
according to the programme automatically later.
• In standby mode, set your desired cooking programme.
• Press the PRESET/CLOCK button once, the time of the day will display and the delay
timer indicator will illuminate.
Rotate the ENTRY dial (START/QUICK START button) to set the hour that you want to
•
start the programme.
• Press the PRESET/CLOCK button once, rotate the ENTRY dial (START/QUICK START
button) to set the minutes.
Press the ENTRY dial (START/QUICK START button) to confirm. Once the clock reach
•
the preset time, the system will start the preset programme automatically.
NOTE:
In preset state, press the PRESET/CLOCK but ton once, the preset cooking time will be
•
displayed for 5 seconds. You can press STOP/CLEAR button to cancel the preset function.
• Quick start and defrost can not use the preset function.
2. QUICK START
Direct start
You can directly start cooking on 100% microwave power level for 30 seconds by pressing
the ENTRY dial (START/QUICK START button). The cooking process will start immediately
and each time the dial is pressed this will increase the cooking time by 30 seconds.
NOTE: The cooking time may be extended to a maximum of 10 minutes.
3. CHILD LOCK
Use to prevent unsupervised operation of the oven by children.
a. To set the CHILD LOCK:
In the stand-by mode, press STOP/CLEAR but ton for 3 seconds. There will be a long beep
denoting entering the children-lock state and the " " indicator will illuminate together with
the current clock time.
b. To cancel the CHILD LOCK:
In the stand-by mode, press STOP/CLEAR but ton for 3 seconds. There will be a long "beep"
denoting that the lock is released.
R-244_OM_WEST.indb 19
GB-19
2017-06-09 08:42:26