Cleaning And Maintenance; Disposal Of Packaging And Products - Auping Match Typ 377 Gebrauchsanweisung

6. Cleaning and maintenance

As part of Auping's commitment to caring for
the environment the product has been given a
powder coating. Some of this coating material
can drop off underneath the bed during the
first weeks of use. This is harmless and easily
removed.
Remove stains on the mesh base with a damp
cloth and gentle cleaning agent. Never use a
scouring sponge or scouring agents.
Dust the mesh base and leg frame
occasionally.
_01PPD_3503 BinnenW.pdf - pag.17
7. Disposal of packaging and
product
Every year Auping invests in cleaner produc-
tion processes and tries to save the environ-
ment as much as possible by using durable
materials. The mesh bases are constructed of
galvanised steel, a material which is excep-
tionnally well-suited for recycling.
Removal
Remove the plug from the socket before
moving the bed.
Never use the loops of the manually adjustable
parts to move the Match mesh base. Lifting
the bed by these loops may result in irre-
pairable damage to the hinge sections and is
not covered by our warranty.
Make sure that the mesh base cannot fall open
during transport - by lashing the subframe and
upper frame together, for example. Do not
remove any screws from the mesh base.
Please note!
The head support can drop down when the
motor on the head end of the bed is being
dismantled.
Safe waste disposal
The frame of the mesh base is constructed of
a highly sprung tension mesh. Do not saw
through the frame; do not weaken or impair
the frame in any way.
The packaging is made up of cardboard and
polyethylene film (PE). Please dispose of these
materials in a responsible way in accordance
with the regulations of your local authority.
LET OP !!! Lage resolutie!
GB7
June 12, 2008