ESC "C" <0> n
[Function]
[Code]
[Range]
[Outline]
[Default]
VT
[Function]
[Code]
[Outline]
Setting the n-inch page length
<1B>H <43>H <0> n
1 ≤ n ≤ 127
This command sets the length of one page to n-inches.
n = 42
Vertical tab
<0B> H
This command feeds the paper to the next vertical tab position. It cannot be fed unless the
vertical tab position has been set. If the current position is equal to or greater than the
maximum set vertical tab position, it will be fed to the head of the next page.
60
iDP3410 User's Manual
CITIZEN