LF
[Function]
[Code]
[Outline]
CR
[Function]
[Code]
[Outline]
ESC "z"
[Function]
[Code]
[Outline]
Printing and paper feed
<0A>H
If the print buffer contains the data, this command will feed the line after printing. If not,
the command only feeds the line.
Printing
<0D>H
This command prints the data. If the DIP switch segments 1 to 6 are set to OFF, the
printer will print the data in the print buffer and feed the paper by one line. If they are set
to ON, the printer will print the data in the print buffer and will not feed the paper.
Setting the 1/6-inch line feed width
<1B>H <7A>H
This command sets the line feed width to 1/6 inch (Default).
58
iDP3410 User's Manual
CITIZEN