FLORABEST FRG 45 A1 Bedienungsanleitung Seite 34

GB
MT
30
Step 2
IMPORTANT
► The edge of the bottom shelf
must be rotated such that the indentations of the boreholes face outwards,
thereby enabling the screwheads to be accommodated within them.
♦ Assemble and secure the bottom shelf
M5 nuts, to the 4 legs (
9
Step 3
♦ Guide the axle 8
♦ Place the wheels 7
Ø 8 washer and an M8 self-securing nut.
♦ Tighten the nuts with an 13 mm open-jawed spanner. If necessary, hold
the axle 8 with the pliers. To prevent scratches, place a cloth between the
pliers and the axle
6 must face downwards. The legs (
, using 4 M5 x 30 screws plus
6
5 + 9 ).
through the lower boreholes on the short legs
on the axle 8 and secure both of them, each with a
8 .
9
8
Assembly
5 +
5
6
9 .
7
FRG 45 A1
9 )