Panasonic KX-TCA185 Handbuch Seite 11

Location of Controls
Ringer/Charge Indicator
Headset Jack (For KX-TCA185/KX-TCA285)
The following wired headsets can be used with this unit. (Not all
operations with the headsets can be guaranteed.)
R Panasonic RP-TCA400 and RP-TCA430
The headset is an optional accessory. For up-to-date information
about headsets that have been tested with this unit, please contact
your dealer.
TALK/SP-PHONE (Speakerphone) Key
Used to make or answer calls, or toggle between Receiver mode
and Hands-free mode during a conversation.
Navigator Key
The Navigator Key includes four arrow keys and a centre key. The
arrow keys are used to adjust the ringer/receiver volume or move
the cursor to select an item. The centre key is used to confirm a
selection. If in standby mode, pressing the keys perform the
following functions:
LEFT ( ) ® Used to perform various common functions quickly.
UP ( ) ® Used to display the Incoming call log.
RIGHT ( ) ® Used to assign functions to each dial key (0–9, G,
and #).
DOWN ( ) ® Used to display the Incoming call log.
CENTRE ® Used to display the Menu.
HOLD Key
Used to place a call on Hold.
Silent Mode Key
Used to turn Silent Mode on or off when pressed for more than 2
seconds in standby mode.
Message Key
Used to leave a message waiting indication, or to call back the party
who left a message waiting indication.
Receiver
Display
Soft Keys
The handset features 3 soft keys. By pressing a soft key, you can
select the feature shown directly above it on the display.
11