Inhaltsverzeichnis
Werbung
g
Installation
In order to connect the WLAN IP Camera to your computer, the fol-
lowing steps must be performed in the specified order:
1) Install the configuration software using the installation programme
supplied on the CD-ROM.
2) Establish a network connection.
3) Configure the device via the web browser.
NOTE
Before starting the installation, observe the following instructions:
►
Save all data and close all running application programmes.
►
If you already have another version configuration software
installed on the computer, uninstall this first.
Installing the software
The following describes the installation of the software for the Win-
dows XP, Windows Vista and Windows 7 operating systems.
NOTE
►
The installation is more or less the same for all the above oper-
ating systems. Any differences are explained in separate notes.
►
The display of the menus may differ according to operating
system. The following illustrations relate to a clean installation of
the respective operating system.
Place the programme and driver CD supplied into the CD drive of
your computer. The installation programme starts automatically.
70
Startup
00053157
Werbung
Inhaltsverzeichnis
