8.4.7
Accessories
•
Check the accessories for damage, dirt and completeness. Replace damaged accessories and
make sure that the accessories are complete.
•
Remove dirt with clean running water. Dry the accessories. Apply a thin coat of preservative oil to
the external steel parts.
8.4.8
Carrying handle
•
Check the carrying handle for damage. Replace a damaged carrying handle.
•
Check the attachment of the carrying handle. If necessary, fasten it firmly by tightening the bolts.
8.5
Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
8.6
Storage
•
Place the blade tips over each other to prevent injury. Do not fully close the blades so that the tool
can be stored without pressure.
•
Apply a thin coat of preservative oil to the external steel parts.
•
Store the unit in a dry and well-ventilated area.
9
Decommissioning/Recycling
At the end of its service life the equipment can be scrapped and recycled.
•
Make sure that the equipment is put out of order to avoid any use.
•
Check that the equipment does not contain any pressurized components.
•
Recycle the various materials used in the equipment such as steel, aluminium, NBR (Nitrile
Butadiene Rubber) and plastic.
•
Collect all dangerous substances separately and dispose of them in an environmentally responsible
way.
•
Consult the Holmatro dealer about recycling.
HCT5111 (RH)(ST)/HCT5117 (RH)(ST)
916.001.234_004
EN
31