Inhaltsverzeichnis
Werbung
SPARE PARTS LIST FAG-230/2000
FERM NR
DESCRIPTION
406940
FLANGE OUTSIDE
406941
FLANGE INSIDE
406942
WHEEL COVER
406943
SPINDLE GEAR
406944
PINION GEAR
406945
ROTOR
406946
STATOR
406947
BRUSH HOLDER
406948
CARBON BRUSH SET (2PCS)
406949
BRUSH CAP
406950
SWITCH
406877
SIDE HANDLE
406814
SPANNER
42
REF NR
1
ANGLE GRINDER
3
4
THE NUMBERS IN THE FOLLOWING TEXT
18
CORRESPOND WITH THE PICTURES AT PAGE 2
28
32
35
machine works, and how it should be operated. Maintain the
machine in accordance with the instructions, and make
42
certain that the machine functions correctly. Keep this
43
operator's guide and other enclosed documentation with the
44
machine.
51
CONTENTS:
59
1. Machine data
60
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
INTRODUCTION
This machine is developed for grinding and roughing of
metal and stone.
TECHNICAL SPECIFICATION
Voltage
Frequency
Power input
No-load speed
Disc diameter
Spindle dimension
Weight
Lpa (sound pressure)
Lwa (sound power)
Vibration value
PACKAGE CONTENTS
1 Angle grinder
1 Side handle
1 Spanner
1 Set carbon brushes
1 Instruction manual
1 Safety instructions
1 Warranty card
FEATURES
Fig.1
1. on/off switch
2. screw-on lid carbon brush (both sides)
3. spindle lock
4. grinding disc
5. side handle
6. lock-off button
Ferm
Ferm
Read this operators guide carefully, before using
the machine. Ensure that you know how the
| 230 V~
| 50 Hz
| 2000 W
| 6000/min
| 230 mm
| M 14
| 4,9 kg
| 97,9 dB (A)
| 110,9 dB (A)
| 3,2 m/s
2
2. SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following
symbols are used:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don't
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets
damaged and during maintenance
Keep bystanders away
Risk of fire
Wear ear and eye protection
Wear protective gloves
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the
appropriate recycling locations.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions. Keep these
instructions in a safe place!
Always check that the power supply corresponds to
the voltage on the rating plate.
Your machine is double insulated in accordance
with EN 50144; therefore no earthwire is required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
3
Werbung
Inhaltsverzeichnis
