General Safety Instructions - Bostitch GFN1564K Anleitung

SAFETY AND OPERATION MANUAL
THIS POWER TOOL IS POWERED BY AN
INTERNAL COMBUSTION DEVICE AND
SHOULD ONLY BE USED WITH THE
GB
DISPENSERS OF COMBUSTIBLE GAS WHICH ARE
LISTED IN THESE HANDLING INSTRUCTIONS.
BEFORE OPERATING THIS TOOL, ALL OPERATORS
SHOULD STUDY THIS MANUAL AND THE TOOL
TECHNICAL DATA TO UNDERSTAND AND FOLLOW THE
SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE
REFERENCE.
IF YOU HAVE ANY QUESTIONS, CONTACT YOUR
BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
Bostitch tools have been designed to provide excellent
customer satisfaction and are designed to achieve
maximum performance when used with precision
Bostitch fasteners, engineered to the same exacting
standards. They will deliver efficient, dependable service
when used correctly and with care. As with any fine
power tool, the manufacturer's instructions must be
followed for best results.
Note: Additional safety measures may be required
because of your particular application of the tool.
Contact your Bostitch representative or distributor with
any questions concerning the tool and its use.
Note: Bostitch cannot assume responsibility for product
performance if any of our tools are used with fasteners
or accessories not meeting the specific requirements
established for genuine Bostitch nails, staples,
batteries, fuel cells, chargers and accessories.
LIMITED WARRANTY
Bostitch Inc. warrants to the original retail purchaser
that this product is free from defects in material and
workmanship, and agrees to repair or replace, at
Bostitch's option, any defective product within 90 days
from the date of purchase. This warranty is not
transferable. It only covers damage resulting from
defects in material or workmanship, and it does not
cover conditions or malfunctions resulting from normal
wear, neglect, abuse or accident.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED
TO THE DURATION OF THIS WARRANTY. BOSTITCH
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Some countries do not allow limitations on how long an
implied warranty lasts, or the exclusion or limitation of
incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may
also have other rights which vary from state to state or
from country to country. To obtain warranty service, you
must return the product at your expense, together with
proof of purchase, to a Bostitch regional warranty repair
center.
ACCESSORIES
These tools are supplied with the following accessories:
1) Battery charger
2) Case
3) Hexagonal bar wrench for M4 screws
4) Hexagonal bar wrench for M5 screws
5) Tool lubricating oil
6) Battery
7) Charger connecting plug (DC)
8) AC Adaptor
9) No Mar Tip (mounted on tool)
Optional accessories are also available and sold
seperately:
1) Fuel cells
2) Finish Nailer Lubricant 250cc

GENERAL SAFETY INSTRUCTIONS

Only those fasteners, batteries, fuel cells and chargers
that are specified in these operating instructions should
be used with the tool. The tool and the specified
fasteners are to be considered as one single system for
safety purposes.
Repairs shall only be carried out by the authorised
agents of Bostitch or by other experts, giving due regard
to the safety, operating and maintenance instructions in
this manual and tool technical data.
Note: Experts are those who, as a result of professional
training or experience, have acquired sufficient
expertise in the field of fastener driving tools as to be
able to assess the safe condition of fastener driving
tools.
IN ADDITION TO THE OTHER WARNINGS IN THIS
MANUAL OBSERVE THE FOLLOWING FOR SAFE
OPERATION:
Do not dispose of electric tools together with household
waste material!
x 1
x 1
x 1
x 1
x 1
x 2
x 1
x 1
x 1
Code ref: FC30ML
Code ref: SB-20CL