Conceptronic CM3GD Benutzerhandbuch Seite 70

ENGLISH
System:
Menu Language
Set Time
HDD Format
Timer Setup
Firmware Upgrade
Restore Default
[ Setup menu – TV Setup ]
TV Setup:
TV Input
Channel Scan
Manual Tune
TV Program
Select the language you want to use when operating the Media Giant.
Change the time and date.
Format the internal harddisk (See chapter 15).
Slideshow Timer:
Screen Saver Timer:
Upgrade the firmware of the Media Giant.
A firmware upgrade can be done through the internet or through a USB storage
device. The firmware Upgrade option can be set to 'Auto' or to 'Manual'.
When 'Auto' is selected (default), the Media Giant will check on random times for
new firmware online and upgrades the firmware automatically when no recording /
playback is running on the Media Giant.
When 'Manual' is selected, you can manually check for new firmware.
Note: To check your current firmware version, press the 'Info' button (27) on the
remote control when you are in the Main menu. The firmware version will
be shown on your screen.
Restore the Media Giant to the default settings and initialize the Setup Wizard to
reconfigure the unit.
Select your country from the country-list. If your country is not listed, select
'Other' from the list.
Tip: You can also scan a specific DVB-T frequency band by selecting '6M'
(600Mhz), '7M' (700Mhz) or '8M' (800Mhz).
Start an automatic channel scan. The automatic channel scan of the Media Giant can
take a while, but will search and store automatically all found channels in the
memory of your Media Giant.
With the Manual Tune feature, you can add new channels to your existing channel
list (with the 'Add' option) , remove channels from your channel list (with the 'Skip'
option), or assign names to the found channels (with the 'Edit' option).
With the option TV Program, you can configure the Media Giant to show all DVB-T
channels (including paid channels, which cannot be played on the Media Giant), or
only show the Free (FTA) channels.
Change the slideshow interval during a picture slideshow.
Change the inactivity time to activate the screensaver.
70
[ Channel Edit ]