Preparing The Appliance - Krups ESPRESSERIA AUTOMATIC PREMIUM Bedienungsanleitung

Pull out and fill the
water tank.
Do not fill the water tank with hot water, milk or any other liquid. If you turn on the appliance when the water
tank is not in place or not correctly filled (under the "min. " level,), the "fill water tank" light will come on and
making an espresso or a cup of coffee will be made impossible.
NEVER PUT GROUND COFFEE IN THE COFFEE CONTAINER.
It is recommended that you do not use oily, caramelised or flavoured coffee beans for this machine. These kinds of beans
may damage the machine.
Check that the coffee beans do not contain any foreign particles such as grit, as any damage caused by the presence of
foreign particles will negate the guarantee.
Do not put water into the coffee bean container.
Remember to fit the drip tray to avoid waste water flowing onto the work surface and staining it or scalding you.
Check that your water tank is clean.
Use the rotating button to select a function, increase or reduce values. Confirm your choice using the OK key.
Press "On / Off" to turn
your appliance on. Follow
the instructions that appear
on the "choice of lan-
guage" screen.
The appliance will ask you to set:
Language
Measurement unit
Date
Clock
Auto-off
Auto-on
Water hardness
Filter
When being used for the first time, it is possible that the machine will ask to be filled up. Just follow the instructions on
the screen.

PREPARING THE APPLIANCE

Put it back in place by
pressing firmly and
close the lid again.
FIRST USE / SETTING MACHINE PARAMETERS
Use the rotating button to
choose a language (high-
lighted). Press the OK key
to validate.
You can select your chosen language from those offered.
Choose either ml or oz as your measurement unit.
You must set the date.
You can choose between 12 hour or 24 hour time display.
You can choose the period after which your appliance will stop automati-
cally, from 30 minutes to 4 hours by 30 minute increments.
You can automatically start pre-heating of your appliance at your chosen
time.
You must set your water hardness between 0 and 4. See "Water hard-
ness measurement" section.
You must indicate whether a filter is fitted or not (Claris – Aqua Filter
System cartridge)
Open the coffee bean
container lid. Add the
coffee beans (250 g
maximum).
Select
When you first use your appliance, it will ask you to set
several parameters. If you unplug your appliance, you
will again be asked for some of these parameters.
4
Close the coffee bean
container lid again.
Confirm