Siemens Gigaset S400 professional Bedienungsanleitung Seite 116

Gigaset S790 / BRD-SEN EN / A31003-G2100-U112-3-7419 / registr_sett.fm / 06.07.2011
Using multiple handsets
Transferring a call to another
handset
You can transfer an external call to another
handset (connect).
u
s
When the internal participant answers:
¤
If necessary, announce the external call.
a
The external call is transferred to the other
handset.
If the internal participant does not answer or
the line is busy, press the display key
return to the external call.
When transferring a call, you can also press
the end call key a before the internal par-
ticipant answers.
Then, if the internal participant does not
answer or the line is busy, the call will auto-
matically return to you.
Internal consultation/conference
calls
When you are conducting an external call,
you can call an internal participant at the
same time for consultation or hold a confer-
ence call between all 3 participants.
You are conducting an external call:
u
s
42
Open the list of handsets.
The external participant hears
music on hold, if activated
¢
( page 52).
Select a handset or Call All and
§OK§
press .
Press the end call key.
Open the list of handsets.
The external participant hears
music on hold, if activated
¢
( page 52).
Select handset and press
The internal participant is
called.
If the participant picks up, you can either:
§End§
or:
§Conference§
Please note
u
If only two handsets are registered,
the other handset is called immedi-
ately by pressing the u key.
Pressing and holding the u key calls
u
all handsets immediately.
Ending a conference call
a
§End§
to
If an internal participant presses the end call
key a, the other handset remains con-
nected to the external participant.
Accepting/rejecting call waiting
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). With Calling Line Identifi-
cation, the caller's number will appear in the
display.
Ending an internal call, accepting an
external call
§Accept§
The internal call is ended. You are connected
to the external caller.
Rejecting the external call
§Reject§
The call waiting tone is turned off. You
§OK§
. remain connected to the internal partici-
pant. The ringtone can still be heard on
other registered handsets.
Press the display key.
You are reconnected with the
external participant.
Press the display key.
All 3 participants are connected
with each other.
Press the end call key.
Press the display key.
Press the display key.