Polaris Sportsman 450 HO 2017 Betriebsanleitung Seite 41

Instrument Cluster
Digital/Analog Gauge (Premium Models)
Indicator Lamps
Lamp Indicates
Vehicle
Speed
Over
Temperature
EPS Warning
(if equipped)
High Beam
Check Engine This indicator appears if an EFI-related fault occurs.
MODE Button Press the mode button to toggle between different
MODE
Seat Belt
Brake Failure This icon will illuminate if the vehicle sensors detect a
Turn Signals/
Hazard
Signals
Trailer Turn
Signal
FEATURES AND CONTROLS
When standard mode is selected, speed displays in
miles per hour.
When metric mode is selected, speed displays in
kilometers per hour.
This lamp flashes to indicate an overheated engine. If
the indicator stops flashing but remains illuminated,
the overheating condition remains, and the system
will automatically reduce engine power.
This indicator illuminates when the key is turned to
the ON position and goes off when the engine is
started. If the light remains on after starting the
engine, the EPS system is inoperative. See your
authorized POLARIS dealer for service.
This lamp illuminates when the headlamp switch is
set to high beam.
Do not operate the ATV if this warning appears.
Serious engine damage could result. See your dealer.
displays on the digital gauge.
This lamp flashes for several seconds when the key is
turned to the ON position. The lamp is a reminder to
wear helmet and seat belt before operating.
malfunction in the brake system.
Both arrows flash when either a turn signal or the
hazard signal is activated. If a lamp fails, or if there is
a short circuit in the signal system, the lamp flashes at
more than twice the normal rate.
The corresponding turn signal indicator flashes when
the trailer light harness is properly connected to the
Condition
41